Masonry and tiling of old houses

After experiencing the vicissitudes of the old house, at the moment of refurbishment,https://www.call-master.tw, in addition to changes in layout, style replacement, furnishings, and other external designs, if you want to be once and for all, you don't need to worry about the future. "The most important thing is actually the foundation project." As long as a good foundation is laid, the opportunity for secondary repairs can be eliminated. Let's follow the steps of Zhang Xin's design team and explore the mystery of the old house renovation! Do you know that the floor is divided into soft bottom construction and hard bottom construction? ►Soft bottom construction Mix the cement powder, sand, and water to the required high-adhesive layer at a specific ratio. Before the sand layer is dry, pour the cement mortar and paste the floor tiles, and wait for the water and gas to completely spit out, then fill it with cracks to protect it. ► Hard bottom construction Also use cement powder, sand, and water to the perfect ratio, and use the grouting method to fill out the required high-adhesive layers. After waiting for hardening, you can add a waterproof layer to protect the floor tiles. Akai designer suggested that this method of application can be used in bathroom space. Compared with soft bottom construction, hard bottom construction is more resistant to water and moisture, and it can also reduce the risk of tile bursting. What should I do if the tiling meets the corner? When pasting tiles, you usually encounter an elevation angle of 90 degrees. At this time, what methods can be used to close them? In the past, a 45-degree back cut method or a stainless steel edge strip was used. At present, some specific tiles on the market will be attached with a special edge strip. In addition, recently, a new method is called "stone filling beauty" , This method will make the closing line more neat and less prone to seepage problems!